We cut the supports 16 in. long, but you can place the second shelf at whatever height you like. Screw the end supports to the walls at each end. Use drywall anchors if you can’t hit a stud. Then mark the position of the middle supports onto the top and bottom shelves with a square and drill 5/32-in. clearance holes through the shelves. Drive 1-5/8-in. screws through the shelf into the supports. You can apply this same concept to garage storage. See how to build double-decker garage storage shelves here.

Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. How to make storage shelves: All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set. Also, I couldn’t find a good tutorial that illustrates the process of building a wooden boat-shaped swing set. Most Probably, I will write one when I build mine.But if you really want this swing set like right now, I would suggest you hire a good woodworker, who can build something similar. Or just search the internet and maybe you get lucky enough to find a tutorial for this. Good luck either way.
I built my first platform bed by following the steps mentioned in the tutorial and the end result was everything I expected. It was as beautiful as comfortable and strong. It only cost me around $60 to build this one from the scratch. And if I can build it, anyone can. What you need is a little bit of woodworking experience and a lot of confidence. Collect the items as suggested in the video and start working now.
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.

I hope you’re SO inspired by the simplicity of these projects, and have the confidence to go give one of them a try! You have NOTHING TO LOSE! Remember, even the most season woodworkers and carpenters started somewhere. So don’t dismay! And you can always ask me questions or tag me on social media to show me your projects! I’m @RealityDaydream on both Instagram and Facebook!

Sometimes when I notice a pattern in the emails I receive and realize that many people are asking the same question, I decide to just go ahead and write a post about it! Because clearly, there’s a need for good and EASY beginner woodworking projects to help those of you that are ready to dip your toe into the amazing and creative world of woodworking.

Dremel tools are known for their reliable performance, incredible versatility, and exceptional comfort. The Dremel 4000 builds on that tradition with a more responsive and comfortable design, as well as added features that reflect users’ most asked-for improvements. It’s ideal for carving, engraving, routing, grinding, sanding, cutting, cleaning, polishing, and more. The Dremel 4000’s improved motor delivers smooth performance at all speeds from 5,000 to 35,000 RPM, and electronic feedback circuitry maintains a constant tool speed under load. Its slim, ergonomic body provides a 360-degree grip zone in every position for improved precision, while a variable-speed slide allows for both fast speed adjustment and consistency at your selected speed. A strategically placed on/off switch won’t interfere with the grip during use.
×