Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
The Kensun D1002 model is the 2015 version of the D1001 model. The Kensun D1002 model has been tested on up to 33 inch tires. Instead of being caught helpless roadside with a dastardly flat, be one step ahead with this highly portable and easy to use Kensun air compressor kit in your trunk.Multi-function inflator with operation under DC 12V or AC 110V.
×